Furnace Repair & Maintenance Pico Rivera CA | OC’s #1 HVAC Contractors
Do I need furnace repair?
Traditionally when we get into the later months of the year (October, November, December), the need for heating comes up in many households. There are multiple scenarios where your furnace could be underperforming or in need of maintenance that could lead to higher long-term costs or even hazardous environments. This begs the question “How do I know I need furnace repair?” We’ve developed a furnace inspection checklist that we think will help you have an idea of whether your unit needs service or not.
- Age: If your unit has a long shelf life (10+ years) and hasn’t received routine maintenance (we recommend it yearly), it is most likely time to get that unit checked.
- Check the air filter: An air filter replacement is one of the most common fixes that leads to inefficient furnace usage or poor heating. They are recommended to be replaced every 3 months.
- Clean the burners: Making sure the burners and flame sensor are cleaned is very important. The flame should be a consistent blue, a yellow or flickering flame could indicate bigger issues such as a dirty burner or a bad mixture of chemicals in the air.
- Inspect heat exchanger & CO detector: Making sure the batteries are replaced on the CO detector. Checking the heat exchanger for cracks & leaks is important as it transfers the heat from the combustion chamber to the air ducts.
- Check wiring, look for leaks, lubricate components: These tasks encompass essential routine maintenance for your unit, significantly enhancing the overall efficiency of your home’s heating system.
Consequences of a bad furnace
We strongly advocate for annual heating unit maintenance, which not only guarantees efficient and safe heating but also results in savings on electricity bills, keeping you cozy on cold nights. Neglecting maintenance can be particularly troublesome during the winter season.
Our experienced professionals are well-prepared to address all your furnace tune-up requirements. As a 5-star HVAC contractor located in Pico Rivera, CA, we provide competitive pricing for our heating services. Regular tune-ups represent a smart investment, substantially lowering the potential for costly emergency repairs and ensuring your continuous warmth and comfort throughout the entire winter.
- Smelling anything funny or odd from your vents
- Unusual symptoms such as frequent headaches, burning eyes, or flu-like symptoms.
- Drop in air quality and lowered output of heat
- Unusual sounds consisting of banging, rattling, squealing, or popping sounds.
- If you find yourself constantly needing to adjust the thermostat to achieve your desired temperature.
- Cost of your electricity bill is steadily rising or is noticeably higher in the winter months.
How much does furnace repair/maintenance cost in Pico Rivera CA?
When it comes to furnace and heating repair costs, they usually fall in the range of $200 to $500, and in some rare cases, may reach up to $1,500. While these figures may appear significant, consider that a new replacement unit can exceed $6,500.
To make the best decision, we recommend scheduling a consultation for a thorough evaluation of your current heating system. We value your trust and understand the importance of transparency, especially given the fluctuations in the market. Rest assured, we’re committed to providing honest and respectful service you can rely on.
Working with Omni Air HVAC for your local furnace & heating repairs/tune-ups:
Reliability
Fully certified and insured for your furnace & heating repairs. We take pride in the work we do.
Preferred Pricing
Up front, honest, and fair flat rate pricing, no extra ambiguous hours with labor fees from troubleshooting.
Knowledge
Our highly knowledgeable technicians get you a fast and honest diagnosis
